Any tricks to reinserting the motherboard after other repairs?
The motherboard lifts out rather easily when properly disconnected. Reinserting it however seems to be rather tricky. Any hints on making it slide in properly?
Is this a good question?
The motherboard lifts out rather easily when properly disconnected. Reinserting it however seems to be rather tricky. Any hints on making it slide in properly?
Is this a good question?
Look over this guide, a little bit different model but same issues: iMac Intel 27" EMC 2639 Logic Board Replacement
Was this answer helpful?
Just had to look closer down in the dark recesses... got to hold it just right and work it in.
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 51