Fix Your Stuff Community Store

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Questions View all

Options

iPhone 6 screen won't turn on after screen replacement

I replaced my screen perfectly and then, when i tried to connect it back on, i saw smoke between the flex cable and the fpc connector, and when i tried to turn it on, i could sense vibrations and hear siri, but the screen doesn't turn on

I have put all screws at their exact places, my only mistake is that i forgot to unplug the battery, what can i do from now? Would isopropanol on my fpc connector fix the problem? I tried different screens, and they won't light up

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

You've fried the LCD socket on your logic board. This is not a novice repair. I wouldn't recommend pulling out your girlfriends hair dryer and attempting to do this for your first time. I would send it out to a logic board repair shop. I hear iPad Rehab does good work. Also there are a few of us here that do it...but we're not supposed to say? We aren't allowed to promote our own shops here

Was this answer helpful?

Yes No
Score 3

2 Comments:

Or it could be LCD shorted or backlight circuit got blown.

by

Yeah I agree @benjamen50 but it sounds a lot more like he's fried the socket

by

Add a comment

Add your answer

Tchandeu will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 319