Released on September 19, 2014, this 4.7" screen iPhone is the smaller version of the iPhone 6 Plus.

4328 Questions View all

iPhone 6 screen won't turn on after screen replacement

I replaced my screen perfectly and then, when i tried to connect it back on, i saw smoke between the flex cable and the fpc connector, and when i tried to turn it on, i could sense vibrations and hear siri, but the screen doesn't turn on

I have put all screws at their exact places, my only mistake is that i forgot to unplug the battery, what can i do from now? Would isopropanol on my fpc connector fix the problem? I tried different screens, and they won't light up

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

You've fried the LCD socket on your logic board. This is not a novice repair. I wouldn't recommend pulling out your girlfriends hair dryer and attempting to do this for your first time. I would send it out to a logic board repair shop. I hear iPad Rehab does good work. Also there are a few of us here that do it...but we're not supposed to say? We aren't allowed to promote our own shops here

Was this answer helpful?

Score 3


Or it could be LCD shorted or backlight circuit got blown.


Yeah I agree @benjamen50 but it sounds a lot more like he's fried the socket


Add a comment

Add your answer

Tchandeu will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 277