LVDS cable replacement on aluminium bezel matte display
Hi,
I have a piece of history... A1297 17inch mid 2010 first gen i7
It has the aluminium bezel... just coming from mobo repair as the gone bad LVDS cable caused a bit of havoc around the connector.
My question: the aluminium bezel on top of actual LCD panel - is that glued or clipped in?
Can't seem to find much...they are rare compared to usual glass covered panels.
Any best practice advice as I need to remove the frame to get to the lcd end of the lvds.
Is this a good question?
2 Comments
The cover glass and frame is glued
by Dan
Went ahead and removed my post as I was looking at the wrong model HAHA. sorry about that. Good job Dan!
by Jeremy Hopper