A1706 / EMC 3071—Released in November 2016, this 13" Macbook Pro introduces the OLED Touch Bar. Features a dual-core "Skylake" Intel Core i5 CPU and four Thunderbolt 3 ports.

28 Questions View all

Display Assembly Replacement Repairability

I was wondering how difficult is was to remove and re-insatll a new Display Assembly on the new MacBook Pro Touch bar. I noticed hinges in the middle of the screen. Do you have to do anything with the Touch Bar in order to remove the Display>

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Right now we don't have any guides prepped as the system is just to new and parts are just not available yet.

Depending on what happened it might be covered under warranty. Can you tell us a bit more here?

Was this answer helpful?

Score 2

Comments:

Just trying to be prepared. We fix apple computers on a daily basis. I have had a couple calls about folks dropping thier Touch bar macs and smashing the LCD which obviously the entire assembly needs to be replaced. Watching the Teardown video i did not see the Display was removed. Was just seeing if iFixit ever removed the display before and if so, did they have to disassemble the touch bar at all to get to the hinges holding the Display to the Top Case.

by

More likely they yanked the USB-C power cord pulling the system to the floor ;-}

A friend of mine who works for Apple told me he has already seen 4 systems messed up because there's no MagSafe anymore. They're becoming expensive paperweights.

by

For reference: How do I replace my screen on my MacBook Pro? You're not the only one ;-{

by

VERY challenging and parts are not affordable, I think I counted 30 screws for the display touch bar area, total nightmare

by

Add a comment

Add your answer

Store Manager will be eternally grateful.
View Statistics:

Past 24 Hours: 1

Past 7 Days: 9

Past 30 Days: 20

All Time: 195