Released September 25, 2015. Model A1688/A1633. Repair of this device is similar to previous generations, requiring screwdrivers and prying tools. Available as GSM or CDMA / 16, 64, or 128 GB / Silver, Gold, Space Gray, or Rose Gold options.

1656 Questions View all

Touch not work fine after Glass only Replacement.

Hi, i fix any screens with Glass only Replacement. But when i replace the Polarizer than works first fine but when glass with oca press than i musst be very hard press on screen that touch work. Please help me to fix that, any sorry for my bad english :-|

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Answer

Chosen Solution

Have you split it again to see if it works fine with just the polariser? If so, you probably have a bad batch of OCA. Get the green package ROHS stuff, that is the best quality OCA from memory

Was this answer helpful?

Score 6

Comments:

Hi, yes its works fine agian when i remove the new glass. i have buy a glass with frame and oca installed. you belive i have buy trash ? :/

by

Whenever we had touch sensitivity problems with screens, it was a problem with either slightly thicker glass or OCA. We would apply it to the glass ourselves, so we knew we were using good quality OCA.

by

Add a comment

Add your answer

Christian Bodden will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 59