Rep: 13
1
Hi. In the process of removing the Trista IC 1610A3 the capacitor C4501 & C4502 were knocked off and they are so tiny that I can't solder them back on. It is ok to leave these capacitors out. Here is the schematic. These cap are connected from ground to line that go to the tristar. T hanks.
Is this a good question?
Rep: 59
2
They are on Tristar VDD 3V line. I would try to solder them back though. For the sake of filtering out the vcc noise and spikes.
Was this answer helpful?
Rep: 13
1
Ok. Thank. That was what I though. It is a filter and it should be ok for now . Need to have micro tweezer soldering tip for this job. It is better to leave it open than short them to ground.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 3
All Time: 588
