Skip to main content

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Questions View all

Mic is not working properly, even after replacing

My iPhone 6 mic not delivering full voice to other , compare to other iPhones only 50% voice other can hear compare to other iPhone.

I also replace mic , along with full card with which mic is attached.

What to do ., how it get solved

Answered! View the answer I have this problem too

Is this a good question?

Score 0
2 Comments

Have you checked the speaker filters and cleaned them?

by

Is after changing logic board problem get solved

by

Add a comment

1 Answer

Chosen Solution

I've just had the same problem on the same iPhone model. Took the same steps and replaced the dock but without any result at all. Checked the connector on the board under a microscope and it shows no damage.

Full restore didn't bring any result either.

Unfortunately I came to the conclusion that is a logic board problem, some component went bad and needs deeper diagnostic and high microsoldering repair skills.

Was this answer helpful?

Score 2
Add a comment

Add your answer

Maninderjit Singh will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 64