Fix Your Stuff Community Store

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Questions View all

Options

iPhone 6 coil replacement

Block Image

First there was no backlight and only LCD worked. The backlight diode was totally burnt and coil was cracked a little on top. Also capacitor (C1505) was shorted. So I replaced all of them, diode, coil and that one capacitor.

Block Image

And after replacement now the lcd also not working and no backlight. My first question is: when I installed new coil there wasn't that little dot on top of it (on that new one) so does it matter which way I install that coil?

Here is the video after failed repair: https://youtu.be/JnRK43eQD1U

Can anybody tell what is going on please?

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest

Options

If you replaced the coil, diode and cap if you used too much heat u may also need to replace that glass ic in the picture that looks chipped above the diode assuming all the other bits replaced are good...

Did you shield the cpu whilst doing any of this???

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

Mobilefi will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 691