Released September 25, 2015. Model A1687/A1634. Repair of this device is similar to previous generations, requiring screwdrivers and prying tools. Available as GSM or CDMA / 16, 64, or 128 GB / Silver, Gold, Space Gray, or Rose Gold options.

637 Questions View all

failure of touch sensitivity after screen replacement

before repairing the gadget,the touch sensitivity was good...after repairing the screen it lost the sensitivity even with its original screen....i have tried many screens but none is touching.What should i do comrades?

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Answer

Chosen Solution

Does the touch screen functionality of the screens work at all?

Did you inspect the FPC screen connectors on the logic board for any pin damage?

Was this answer helpful?

Score 1


the screen does not fuction at all.....should i replace the whole connector


Unless you can see clear damage on the pins, connector change would not solve the problem. Get yourself a nice magnifier for inspection though


i dont have a magnifier want to try gues work


*i want to try gues work..hope itawork


Add a comment

Add your answer

Richard will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 69