Skip to main content

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Questions View all

iPhone 6 can't go pass the apple logo after proximity/front facing cam

Hey guys,

I have just replaced proximity/front facing camera flex but not phone does not go further then apple logo. But if I disconnect proximity/front facing camera flex it boots just fine. I have tried home+power but the problem remains. Is it bad proximity/front facing camera flex?

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

3 Answers

Chosen Solution

Try a new from camera cable and see if that works. These are often defective and can be damaged easily. Was this the original one or a replacement?

Was this answer helpful?

Score 3

2 Comments:

It is a replacement. I am just worried if it is even possible to get it working if it is not original one? I will ask seller for replacement.

by

That is why. Replacements very, very, very often defective. Don't know why, but they are.

by

Add a comment

Possibly is a bad prox but try to plug in the prox while the device is powered on as well.

Was this answer helpful?

Score 0

1 Comment:

I have just tired that and when I go to camera app front camera shows black screen. If I restart the phone it continues with a boot loop.

by

Add a comment

dissconect the front cam and power on the phone if it boots in system try another front cam

Was this answer helpful?

Score 0

2 Comments:

I have already mentioned that it boots if I disconnect proximity/front camera flex.

by

sorry i did't read that but don't try again to put that fron cam because it may damage the motherboard

by

Add a comment

Add your answer

Karolis will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 69