Released on September 19, 2014, this 4.7" screen iPhone is the smaller version of the iPhone 6 Plus. Identifiable by the model numbers A1549, A1586, and A1589.

4420 Questions View all

Home button not working after replacing

TouchID and Home button features arent working when i replaced the full assembly and followed everything to the letter. Used back plate of old screen to see if maybe it was the ribbon cable and it still has the same problem "touchID could not be activated on this device".

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

2 Answers

Chosen Solution

Home button cable most likely got damaged.

Was this answer helpful?

Score 2

Comments:

I used two different home button cables and the home button itself was disconnected carefully and it still presents the same problem.

by

Have you tried a replacement home button? If it works it will do home button click but not touch ID

by

Add a comment

get a new phone my dude

And would you like to by some dank memes they are very spicey

Was this answer helpful?

Score -1

Comments:

Not my phone, i have a oneplus 3

by

You don't buy memes, you use you interplanetary powers to get them from the magics wurld of the interwebs.

by

Add a comment

Add your answer

Pilottoaster will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 50