Fix Your Stuff Community Store

Repair information and guides for the iPhone 6 Plus that was released on September 19, 2014. Model: A1522, A1524

1525 Questions View all

Options

touch id not working after just opening it, original button and lcd

Hello

My touch id of iPhone 6 plus isn't working anymore, had to replace the camera, but now just closing the lcd isn't working anymore (id touch) have not touched lcd or id touch button, the only wrong thing i did was not to take off battery before taking off lcd

what can i do? it says try later, no error on itunes (tried every thing)

Can I contact apple or just have to wait few days? (my friend who have a shop told me this)

This was not my first reparing

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

4 Answers

Filter by:
Most Helpful Newest Oldest

Options

Did you disconnect the battery? If not do a hard reset on the phone(hold down power and home button for about 10 seconds). You had to have unplugged the home button/touch id(through the interconnect cable) to replace the camera. Without a reboot phones dont recognize the touch id after unplugging and replugging it in.

Was this answer helpful?

Yes No
Score 0

1 Comment:

just tried with hard reset, still not working

i don't know what's gone wrong... Have also unplugged battery but same problem, say try later, the id touch option is not disabled but when click say please try later ....

by

Add a comment

Options

just tried with hard reset, still not working

i don't know what's gone wrong... Have also unplugged battery but same problem, say try later, the id touch option is not disabled but when click say please try later ....

Was this answer helpful?

Yes No
Score 0
Add a comment

Options

do you think if i change backplate with long flex, will start working again?

Was this answer helpful?

Yes No
Score 0

3 Comments:

Thats pretty much the only other part that can be replaced and still keep the touch id at this point.

by

ok thanks, gonna try it

by

Hello, did you replaced long flex cable of home button? Did the Touch ID worked fine again?

thanks.

by

Add a comment

Options

look under the LCD is a metal plate under that metal plate is a flex cable that connects home button with motherboard, change the flex cabble and try again

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

madaraus will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 96