science behind motherboard and panels
Pls how will I insert some chips on the board and how will I create the bus connection
Is this a good question?
Pls how will I insert some chips on the board and how will I create the bus connection
Is this a good question?
Most professional circuit boards and buses are printed on a board.
They are designed either with software and languages such as VHDL
https://en.wikipedia.org/wiki/VHDL
or a simple breadboard
https://www.amazon.com/SunFounder-Basic-...
If you need to repair an existing board with bad chips, you need to have soldering tools and a lot of skill and hand/eye coordination.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 80