Motor winds up faster than normal but has no power. Stops as soon as it has any resistance. I can still hear the motor humming. Brushes seem to be free moving.
Is this a good question?
Rep: 101.2k
8
172
357
@cajamadi ,Peter, Sounds like the center hub retaining bolt may of came loose or hub may have cracked/stripped not holding tight on shaft. Disassembly guide link below may help in diagnosing your issue with the sander. Good luck.
I hope this helped you out, if so let me know by pressing the helpful button.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 1
All Time: 200
