Complete repair manual for the PSP Go, including battery upgrade and display repair instructions.

64 Questions View all

After reassembling my PSP Go the Start & Select buttons won't work

After i disassembled and rereassembled my PSP Go to fix my power switch; i used the PSP Go Teardown guide from this website, and now both the Start & Select buttons won't work anymore; and they were working before then.

so i tried taking my psp go apart and putting it back together again while going over the teardown guide thinking i over looked something, anyone have an idea of what that might be?

Answered! View the answer I have this problem too

Is this a good question?

Score 3
Add a comment

2 Answers

Chosen Solution

Look at the 2nd picture of step 9 in the PSP Go teardown. There is a cable that connects the buttons to the main board, it could be loose.

Was this answer helpful?

Score 3

Comments:

Here's a direct link to the page Aram is mentioning. PSP Go Teardown

by

thanks man, that's exactly what the issue was, i didn't see that cable cause it was hidden by joystick's ribbon cable.

by

Add a comment

I have the same issue, except my cable is in. Any ideas? I just had sound issue which was caused by bad fuse, which i replaced and now works but SELECT/START button doesn't

Was this answer helpful?

Score 0
Add a comment

Add your answer

joel c will be eternally grateful.
View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 16

All Time: 4,914