Rep: 94
4
10
1
When i was younger I introduced clay on the speakers (without opening the up part), but i had this for a long time! Altough there is still clay, speakers work 100% fine. Is there a way to remove it?
Is this a good question?
Rep: 101.2k
8
172
357
Santi12008 , The link below will show how to disassemble the device, allowing you to then dampen clay with water, poking clay from speaker holes or scraping it off with out damaging internal components. Good luck.
I hope this helped you out, if so let me know by pressing the helpful button.
Was this answer helpful?
The speakers are working fine...
Santi12008, Yes I read that in your original question, the instructions were to show you how to open device to clean the dirt out.
My dad said it will use a "needle" to remove the clay
Santi12008, That can work(careful with needle, do not stab oneself or speaker) and maybe vacuum small particles and dust out. Good luck.
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 101
