Options

Fail to replace U4500. Should it be OK?

I got a iphone 6s which doesn't turn on.

I bought a u4500 ic from aliexpress and tried to replace the one.

It seems to be ok until the apple mark came out.

But the screen didn't change. Just apple mark. reboot reboot reboot again.

If i rettach U4500, it would be OK. So I reattached it. And then my iphone 6s didn't turn on.

http://cafeptthumb2.phinf.naver.net/MjAx...

Please see my iphone's screenshot.

Could it survive?

Answered! View the answer I have this problem too

Is this a good question?

Yes No

Score 0

Add a comment

Posted: Jan 26, 2017

Options

Judging from your picture, the pads under U4500 need to be cleaned up properly before trying to install a new Tristar. Remove the old solder, tin it with new, preferably leaded solder and install a new Tristar.

If you were to put a Tristar on that messy board, it is impossible it will work.

Was this answer helpful?

Yes No

Score 3

1 Comment:

Thanks Minho. I'll try and share the results. It will takes some time. Because I need to order new parts and tools from aliexpress. See you soon.

Jan 26, 2017 by Sungoh

Add a comment

iPhone 6s

Fail to replace U4500. Should it be OK?

1 Answer

Add your answer