The Apple iPhone 5s was announced on September 10, 2013. Repair of this device is similar to the previous models, and requires screwdrivers and prying tools. Available as GSM or CDMA / 16, 32, or 64 GB / Silver, Gold, and Space Gray.

3234 Questions View all

Long screw damage repaired but error 4013

Hey :)

I repaired a long screw damaged iPhone 5 today but when I want to update it (because its in recovery mode) it appears with error 4013...

-Im using a dc power supply

-I tried other cables, ports and pc

I had the same problem with 2 iphone 5s...

I repaired a long screw damage on the left bottom ( NOT Bluescreen Hole!)

Iphone had redscreen and after the repair ive not seen the redscreen anymore but both of them have also error 4013 problems...

What can i do?

Is it a nand problem?

On every iphone i can see the serial number when plugged in to itunes, so the nand is good or not? Can it show me the serial number and be damaged too?

What can i do else?

Block Image

Block Image

Answer this question I have this problem too

Is this a good question?

Score 1
Add a comment
Deck the Halls
With tools and Fix Kits

2 Answers

The only thing you can do is recheck your repairs and look for loose loose joints and damage you may have missed the first go around. On the first picture there looks like a trace that has not been touched up on the left side. Do you have any pictures where the repairs are cleaner?

Was this answer helpful?

Score 0
Add a comment

The red screen of death. Classic. Try disconnecting the front camera/proximity sensor cable and see if it works after doing a hard reset also.

Was this answer helpful?

Score 0
Add a comment

Add your answer

Mikail will be eternally grateful.
View Statistics:

Past 24 Hours: 2

Past 7 Days: 7

Past 30 Days: 17

All Time: 165