Charging Port Re-Soldering to Motherboard.
I can't seem to get the Charging Port Re-Soldered on the Motherboard. It's a Strange little dude !!
Is this a good question?
Score
0
369634
1 Answer
Most Helpful Answer
Rep: 101.2k
8
172
358
Don Wilkinson, The video link below shows how to resolder a charge port on the Kindle. Make sure all points to be soldered are good and clean. Good luck.
I hope this helped you out, if so let me know by pressing the helpful button.
Was this answer helpful?
Score
1
1 Comment
The one time I tried, I also failed. I did find that a little flux paste on the pads helped the solder adhere to the pad, and even helped separate the solder so it didn't try to clump together across all of the pads. Even though I got it soldered, it still wouldn't charge. I gave up, probably too quick, because a new kindle was fairly cheap at the time.
by Geoff Ice