Sony ICFC1T alarm clock/radio is manufactured so that in the event of a power outage, you have the peace of mind that your device will continue working so you never miss an event.

13 Questions View all

Why does my Sony ICFC1 clock flash "OFF" on display & not keep time?

My Sony ICFC1 alarm clock has been continuously flashing between the time and "OFF" on the display. Also, the buttons on the back to set time do not correspond with one another.

why would my clock flash this way, also flashes cycle of date as if setting time and has been keeping incorrect time.

Answered! View the answer I have this problem too

Is this a good question?

Score 0

Comments:

my guess the battery needs replacement????????????????

by

Add a comment

1 Answer

Chosen Solution

Hi,

Try a power reset and see if this resolves the problem.

Turn off the AC power to the clock.

Remove the coin cell backup battery from the clock.

Press and hold the Enter/Time Set button for 10 seconds and then release.

Reinsert the coin cell battery and then switch on the AC power and see if you can adjust the time etc.

Here is a link to the user guide for your clock/radio which shows how to remove the coin cell battery. Ensure that you insert it back into its' holder the correct way if it happens to become dislodged when out of the clock.

https://www.appliancesonline.com.au/publ...

Was this answer helpful?

Score 3
Add a comment

Add your answer

Andrew Arruda will be eternally grateful.
View Statistics:

Past 24 Hours: 2

Past 7 Days: 15

Past 30 Days: 56

All Time: 243