Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1491 Questions View all

I replaced the screen and now it doesnt want to power on

i changed the cracked screen on my iphone 3g and when i was done with the change the iphone does not want to power on i connected it to the power source and its still black i dont know what to do!!

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

if you can toggle the vibrate switch and iphone vibrates but no display (try when plugged in) then you need to go back and check connector 1 is on properly-it sometimes pops off as you are closing. hold it with a finger or a small screwdriver until you are just about closed with the display.

it may be that in changing the cracked screen you broke the lcd-did you only change the digitiser or the whole display?

Was this answer helpful?

Score 1
Add a comment

Add your answer

hector will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 463