Skip to main content

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Questions View all

Blank screen after replacing

I have an iPhone 6 that the screen was cracked. When i replaced it the new screen light but no image. I tried another screen and got the same results. I tried unplugging the battery and also tried doing a hard reboot but had no luck. If i put the cracked screen back in it works. Any suggestions

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

You likely have a bad replacement screen(s). Were they both from the same vendor and batch? Do you buy premium replacement screens or low cost models?

If your original cracked screen works, then you do not have a problem with the logic board. Try another known-good screen or order a high quality one from a reputable supplier like iFixit.

iPhone 6 LCD and Digitizer Image

Product

iPhone 6 LCD and Digitizer

$69.99

Was this answer helpful?

Score 1
Add a comment

Add your answer

Michael will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 33