Hot water will not shut off on Kenmore elite h3. Reading 8.03 across leads of switch. Cold water works fine. Drain pump makes noise and get a fh code. Checked pressure switch and hose, hose is good, switch clicks when you blow on hose.
Is this a good question?
Rep: 782.3k
1.1k
893
2.3k
@vongump if your switch does not turn the water off it may have failed in spite of the reading. Could be mechanical failure of the solenoid which could give you the FH reading as well. I'd start with replacing the water inlet solenoids.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 132
