Released on September 19, 2014, this 4.7" screen iPhone is the smaller version of the iPhone 6 Plus. Identifiable by the model numbers A1549, A1586, and A1589.

4494 Questions View all

sim car reader soldering point damage

i tried to replace sim card reader..but bymistake i damged that point where sim card reader conector soldering..plz check my picture.. .

Block Image

sry for poor english,..

plz help me as soon as possible.

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

2 of those three pads connect to the BaseBand IC so they definitely need to be connected. You may want to see if there is a trace that extends beyond the pads but my suspicion is that they go directly through the board layers to come out the other side to connect to VR3101_RF. You will be able to run jumper wires and complete the connections.

Do a search on Google to find the schematics for the iPhone 6 and you will see where they connect.

Was this answer helpful?

Score 4
Add a comment

Add your answer

alok kumar will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 65