The chuck gear is not engaging and can't get through FOR warranty at

The chuck gear is not engaging WHAT can I do TO FIX it

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

@theop , Theo, Sounds like a problem with the forward/reverse switch, switch it back and fourth a bunch of times, may be stuck it the neutral position. The switch or gear drive assy. also may be damage and need replaced. If still under warranty return for repair/replacement/refund. This is in big part an American site and not a lot of Triton power tools or parts found here. Link to your manual and warranty below. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

https://www.tritontools.com/Helpers/GetI...

Was this answer helpful?

Score 2

Comments:

Hi @theop ,

If you are in Oz there is a 3 year (36 month) warranty on the drill. Just read the warranty statement in the link that was provided by @lpfaff1 in his good answer as to what you have to do to get warranty service.

by

Add a comment

Add your answer

Theo Papa will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 19