Announced on September 9, 2015, the iPad Mini 4 maintains the power of an iPad Air 2 in a smaller form factor.

39 Questions View all

Power button isn't work after screen repair

Hi

Plz help me

Power button isn't work after screen repair

Only sleep/wake function isn't working

And i can't find option lock unlock in Setting

ios10 ipad mini4

Thanks

Answer this question I have this problem too

Is this a good question?

Score 1

Comments:

Does the slide to power off screen appear when you hold the power button while the iPad is on or unlocked?

If yes then the issue is linked to the home button flex. I don't remember how the home button is set up for iPad Mini 4 but it it should have touch ID and hall effect sensor chip (that controls smart cover functionality, if it's broken the iPad thinks the cover is closed and disables the lock button press) on there which may need to be transferred from the old home button to the new one or if it's separate you should be able to transfer from old digitizer to new digitizer.

by

Add a comment

4 Answers

Sounds like there is a possibility the cable for the sleep/wake button is not connected properly. Could you please send me the model number? Thanks!

Was this answer helpful?

Score 0

Comments:

model number A1550

by

When you put the device back together, (assuming you changed the screen) did you double, triple check the connectors? Made sure none of them were damaged in the opening process? If there is no visble damage, I would suggest a power button replacement.

by

Add a comment

Hello.

Thanks for responding.

I honsetly still have the same problem even though i cover the sensor after transfering it from the old digitilizer the model of the ipad is A1550

Was this answer helpful?

Score 0
Add a comment

Had the same problem before i noticed the small cable that needs to be soldered onto the new screen. It has 6 connection points, and after transferring and soldering the cable, the on/off button worked perfectly.

Was this answer helpful?

Score 0
Add a comment

a flex cable in the old screen beside home button in left side :)

make sure you but it in new screen :)

that.s it :)

Was this answer helpful?

Score 0
Add a comment

Add your answer

Bs will be eternally grateful.
View Statistics:

Past 24 Hours: 1

Past 7 Days: 11

Past 30 Days: 38

All Time: 224