Hello, I have a Nikon D7000
The dial (S, A, M, P, etc) has broken and only the axis remains. I can move it and change the function, but I would like to get the rest of the dial to see how it is and make a new dial with a 3d printer. But I have no idea if you have to open the camera or if the dial comes out with pressure.
Is this a good question?
Rep: 101.2k
8
172
357
@akilesroto , Mode dial/button removal, I posted a couple links below of tear downs on your camera which should show how to access the button for removal. Also if it comes to it last link replacement dial, which you can also do a search for a lower price. Good luck.
I hope this helped you out, if so let me know by pressing the helpful button.
Nikon D7000 Shutter Assembly Replacement
Guide
Difficulty:
Moderate
—
30 minutes
Guide
Difficulty:
Difficult
—
45 minutes - 2 hours
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 2
All Time: 919
