Took the differential out of my 1995 gmc sierra. both Axles actuator..ect. am I supposed to put anything back in the hubs because I went down the road and my passenger tire decided to move the the tyerod had broken but everything is still solid just the hub is loose.
Is this a good question?
Rep: 102.5k
18
191
304
If you want to run it without the axles you need to take the universals out of the axle and use the spline end to hold the bearing together. Without the spline and knuckle the wheel bearing has play . Hope this helps
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 36
