Skip to main content

Camera has been dropped in water and brake powerboard

I was trying to take a picture of my daughter on the see, but the camera took some water from a too great wave. I disassembled it, but the power adapter is unrecoverable. Where can I find spare parts for fujifilm camera (powerboard or the entire motherboard)? I searched online without result :(

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

If your camera was dropped in salt water it will be rather impossible to repair i t, as the salt in the water has most likely, done quite a bit of corrosion on sensitive parts of the camera. If the water was fresh there are some chances of saving the camera. Wipe off as much water as possible on the exterior of the camera and take it the soonest possible to a service facility. They may be able to dry the water in the interior part of the camera and bring it back to normal.

Was this answer helpful?

Score 0
Add a comment

Add your answer

Giacomo will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 105