Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 16 or 32 GB capacity / black or white plastic back.

1946 Questions View all

Microphone don't work well (buzz) and it too from earphones mic

Hello

I got iphone 3gs with microphone signal problem. Microphone don't work well (buzz) and it too from headset mic and bluetooth headset mic too. I was replace microphone but nothing happened. I also reinstall ios from 4.0.1 to 4.1 and nothing too (((

Before i have 2 problems - audio jack and microphone signal, but i was repair audio jack.

So i was think that damage was in the motherboard perhaps somebody could give some working tips to solve this problem?

Thanks a lot in advance

Answered! View the answer I have this problem too

Is this a good question?

Score 0

Comments:

I'm not sure about how you call a microphone. Do you mean speakers or earphones?

by

Add a comment

1 Answer

Chosen Solution

have you any sound from the phone at all? either on loudspeaker or earpiece during calls?

have you tried opening voice memo app and recording your voice then try play back?

I would've suggested returning phone to shop as may be under warranty.Otherwise I'd try replacing dock assembly or checking connector 4 pins. I think James bond also had this problem and it was 2 small (tiny) ?capacitors beside dock connector on motherboard. Have a look in that area. Search James bond at top to find his solution.

Was this answer helpful?

Score 1

Comments:

I talk about buzz microphone signal from all sides (mic, headset mic, bluetooth mic). I try to record my voice and it like i had @TzcTZccccccTZzzzcccc@...

i find the link, check please

http://forum.gsmhosting.com/vbb/f631/iph...

by

Please, help

by

No USB Connection after I broke little SMD element near connector #4!

This is link to photo of part for noise reduction ( beside dock connector) I haven't had time to go through all his answers but James bond says somewhere it can be fixed with just fine wire and solder.... Take a look at his answers and vote his answer up if it helps!!

by

Add a comment

Add your answer

osipoveg1990 will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 2,047