Skip to main content

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Questions View all

Parts of screen do not work after battery replacement.

After a battery replacement I noticed the following:

1.1)The y or 6 key is not working. I tried the phone on landscape orientation and I saw that the keys were working. Then I tried to draw something on an app, and I saw that in the same place I coudn't draw. As you can see in the following images

Block Image

Block Image

the touch is not working in this specific area, (like a vertical line).

1.2)The other thing I noticed is that in this area, some times there are two white lines. They are not there all the times, they appera and dissapear.

The first two are the main issues, and what bothers me more.

2.1)Some times the touch screen when I swipe on one side and want to change screen, doesn't go to the next screen, but to the screen after the next. (Eg let say I am in the main screen and want to go the secong on the right, it could go directly on the third)

2.2)In addition to the previous, sometimes, when I swipe, instead of swiping ,the phone functions like taping, and it enters an app.

Those two are not so important, but I add them just in case, to find out what is the main issue.

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Hello George, first thing I would try is disconnect and reconnect the cable connections for the screen. But before you disconnect the screen, make sure you disconnect the battery first because if you leave the battery connected while disconnecting the screen you risk damaging the screen. After that do a soft reset.

Was this answer helpful?

Score 1

1 Comment:

Hello Lay! Thank you very much, I will give it a shot!

by

Add a comment

Add your answer

George Drg will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 60