Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1497 Questions View all

Mic Doesn't work after replacing dock connector

So I replaced my dock connector today, the old one wouldn't charge but even when it wouldn't charge everything worked perfectly until it ran out of battery. So today replaced dock connector, everything worked fine, I was pumped, and then I got a call and person couldn't hear me. Mic doesnt work in voice recorder either, however the speakers and charger work fine and headphone mic works.

People have said it could be ribbon 4 since I bought the part on Ebay and someone recommended putting pressure on it while trying to call/record with the iphone open and once again no success, nothing at all... thoughts anyone?

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment
Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.

2 Answers

Chosen Solution

You could try swapping cable 4 from new dock onto old?

Was this answer helpful?

Score 1
Add a comment

Sounds like a bad dock connector. It is pretty common for the mics in the dock connectors to be DOA, especially off eBay. Try buying from a more reliable source.

Was this answer helpful?

Score 0
Add a comment

Add your answer

skeletona will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 2,186