Rep: 85
4
3
On my iphone 5, the proximity sensor does not work.
Auto Brightness works without a problem, but at a call or something else, the sensor does not work.
I have changed the sensor 2 times, what else could it be?
Is this a good question?
Rep: 373
4
1
1
After you replaced it did you soft reset the device? A lot of times it won't register until that has been done. If you have and no luck, make sure you transfer that little white film (black screen only) to the new screen. Still no luck, most likely the connectors on the board which means game over. Hope this helps and good luck!
Was this answer helpful?
Rep: 85
4
3
I did a soft reset a dozen times.
The Display is a white one.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 172
