Skip to main content

High performance tablet computer released by Apple on November 11, 2015. Model A1584.

124 Questions View all

Dead spot in new digitizer. Replaced twice. Dead spots.

Customer brought in an iPad Pro 12.9" with a cracked screen. I replace the screen and soldered the new one on properly 100%. Customer has issues with the dead spot on the screen. So I ordered a brand-new digitizer assembly and install that one. Exact same issue as the first one. Anybody have any suggestions? No apparent damage to the control board and soldering is good. Thanks!

Answer this question I have this problem too

Is this a good question?

Score 0

Comments:

Same supplier? Seconds?

by

Different Supplier. LCD is good on both.

by

Add a comment

2 Answers

then the controller board is bad, simple

Update (11/11/2016)

sounds to me like proccess of elimination its the controller board, too much heat, etc can damage a controller board, hope you find a solution.

Was this answer helpful?

Score 0
Add a comment

lcd is not ok failure

Was this answer helpful?

Score -2

Comments:

LCD is perfectly fine on both. Ordered from 2 separate manufacturers, dead spot in same exact area.

by

Add a comment

Add your answer

GadgetERService will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 456