buttons not working, every button just copy
Non of the buttons seem to work. Any button you hit it just copy
Is this a good question?
Seth, Unplug printer for 10 min. and re plug to reset and try. If this does not fix you can try deleting and re install printer divers/software and try. If still not functioning, probable bad panel/control board in which case you will have to have a Technician have a look, diagnose and estimate repair. May not be cost effective. Good luck.
I hope this helped you out, if so let me know by pressing the helpful button.
Was this answer helpful?
Past 24 Hours: 4
Past 7 Days: 29
Past 30 Days: 140
All Time: 1,431