Skip to main content

A touchscreen GPS released in February 2012 by Garmin with custom position of interests and junction view. The screen size is 4.3" diagonally with 480x272 resolution.

6 Questions View all

Why Won't My Touchscreen Work?

My device will turn on but when I press the screen to make any commands I can not prompt any response. Please help.

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

There are three possible problems that are associated with an unresponsive touchscreen. They are listed from easiest to hardest to complete.

Dirty Screen:

  • If your device has a screen protector, remove it
  • Spray a bit of water or formulated spray onto a microfiber cloth.
  • Wipe thoroughly.
  • Using another dry microfiber cloth, immediately dry the surface.
  • Replace the screen protector with a new one if desired.

Resetting the Device Without Using the Screen:

  • With the GPS unit off, press the bottom right hand corner of the screen. Turn the unit on while maintaining pressure in the bottom right corner. When you see a prompt asking, "Do you really want to erase all user data?", you can release your finger and select yes.
  • If the bottom right of the screen is unresponsive then please refer to the broken screen guide.

Broken Screen:

  • If your device screen is still unresponsive after following the following guides above please refer to this guide for replacing a broken screen

Was this answer helpful?

Score 0
Add a comment

Add your answer

Nathaniel Williams will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 552