Skip to main content

Model A1224 / Mid 2007 and Early 2008 / 2, 2.4, or 2.66 GHz Core 2 Duo processor

548 Questions View all

Won't Turn On Power UP

I can see the Diagnostic Leds, and

Number 1 : It's On when connect the AC Cable

When I push the start button the Leds 2 and 3 turn ON

No 2: ON

No 3: ON

But the LED 4 do not. Still OFF. And the Fans not working, some advice about it?

The SMC was reset and nothing happens.

Answered! View the answer I have this problem too

Is this a good question?

Score -1
Add a comment

2 Answers

Chosen Solution

See this

previous post from Mayer

Remember to return and mark accepted the answer that best solves your problem.

Good luck,

N

Was this answer helpful?

Score 2

2 Comments:

good advice in that post +

by

+ excellent source

by

Add a comment

LED #4

Indicates that the computer and the LCD display panel are communicating. This LED will be ON when the computer is turned on and video signal is being generated. If the LED is ON and there is no image on the LCD display panel, the LCD display panel or inverter might be installed incorrectly or need replacement.

Was this answer helpful?

Score 0
Add a comment

Add your answer

Soptec will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,804