Does anyone know what screw these hadphones use?

I have some Marley Liberate XLBT Headphones where one of the screws came out of the the side. Not sure how. I was told to that I would need an 1.5mm Allen Wrench but I don't know where to find the screws that are used by that. Any help would be great. Even the name of the screws.

I tried contacting them but they didn't know and sending in warranty information its been over a week and no response...

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

4 Answers

Chosen Solution

Search Amazon for liberate Marley replacement screws, it comes with a driver. This happened to me on Wednesday. I don't have a 1.5mm Allen driver so $15CDN all in is probably (my) solution. But also I'm a cheap guy so hobby shop might just get me fixed up for less than that.

Was this answer helpful?

Score 1
Add a comment

Try your local hobby shop. They carry a ton of tiny, allen head screws. Drones and RC vehicles use them and they are always wiggling out. I'd bring your headphones in and see what they have that will fit.

Otherwise, pull the screw out of the other side and measure its total length, pitch and head size. Then you can order one from any of the hobby websites.

Was this answer helpful?

Score 0
Add a comment

@asura Did you have any luck with this?

Was this answer helpful?

Score 0

Comments:

The comment above is what helped. I'm going to have to order it because for some reason these screws continually come undone

by

Add a comment

I used M2 3mm screws and they worked fine.

https://au.rs-online.com/mobile/c/fasten...

Some threadlocker eg Loctite 243 might also help. Take care with it as it may strip paint or damage plastic parts.

Was this answer helpful?

Score 0
Add a comment

Add your answer

Greg K will be eternally grateful.
View Statistics:

Past 24 Hours: 5

Past 7 Days: 27

Past 30 Days: 75

All Time: 716