My Toshiba laptop powers up, but the screen is black.

i think i can give you some tips about this -

1- just remove the battery and turn off the charge and laptop .

2-rest for 2 min and than plug the power(Battery) back to laptop

3. press the power key and hold it for like 1 min and restart the computer

if this does not work try restarting the computer in safe mode

1- just restart the computer and press f8 and select safe mode and once you are in computer try updating windows and graphic driver and remove some of start up programs which might can create issues for any other help visit blog Toshiba laptop black screen and boot problem related help and let me know if anyone gets more issue in computer . i will be glad to help

For those of you with a laptop that does not have a removable battery, this might help. Hold down the power button to shut off the computer, but DON'T TAKE YOUR FINGER OFF THE POWER BUTTON. Hold it there for about 60 seconds more, and then remove your finger. Then, press the power button again to turn the computer on. I did this, and it worked for me :)

see comment No beeps, no post just Black Screen

I have a small electronics repair shop out of my home and just yesterday checked in a third Toshiba machine with this same problem: failed GPU. Cause: overheating.

Each owner has said the same thing: over the past few months, every once in a while the screen stayed black during boot-up, but a restart or something similar like removing the battery, letting it sit overnight, or power-cycling made it boot correctly. Eventually nothing would help and they brought their laptops in for repair.

On the first machine I had to troubleshoot for quite a while before determining the issue, including everything mentioned here in this thread, until finally deciding to replace the mobo over re-soldering the GPU (which I incorrectly assumed was my only option). On the second unit I reflowed using a hairdryer, followed by my kitchen oven. Big job. Didn't want to have to do that with this machine, so I'm borrowing a heat gun tomorrow and using this procedure found on YouTube:

https://www.youtube.com/watch?v=cP2QOXNM...

(Warning: rated PG due to mild cursing)

This is a known issue with the laptops in this line and while one of the other suggestions might work and solve your specific problem, be on the watch for the graphics to eventually die due to dust and/or heat buildup in the future. It's HIGHLY recommended to use a cooling pad under these systems (some of the Toshiba User Manuals even go so far as to tell you that you NEED to use one rather than just SUGGEST it.) and to periodically tear-down and clean out the inside around the heatsink, fan, etc. You'll find the dustier or dirtier your normal environment, the more often you'll need to do it---at least twice per year is a good start, especially if you own pets that shed.

If you would like a copy of my t-shoot list to rule out all the other possible problems that can cause the black screen of doom, message me and I'll be glad to share it. Otherwise, assume your machine needs the gpu reflowed and don't trash it!

The hard disk, OS, screen, etc. are all still fine and in working order (unless you've inadvertently pressed the appropriate keys and don't something to the bios or something weird like that.)

IMO, Toshibas are good machines. I still have my original with Windows 95 on it! I own several models and have found, with the proper maintenance, that they'll last well past 10 years. (Believe it or not, I've found that Dells and Acers are the next best performers among abusive users. LOL.) Every manufacturer has weaknesses: none are perfect. Don't expect to not have issues with electronics because you'll always end up disappointed. Heat, dust and mishandling are the three biggest killers.

Good luck - I hope this helps some of you.

Mary

~Psalm 103~

I also have this type of problem where power on the screen is blank or black.

What I did was to press Fn (Function key) and F5 at the same time. After pressing it for some times my laptop boot.

It works for me.

Try it and give feedback.

K49 AMBO

Method : 1

a. Unplug the power

b. Remove the Battery

c. Press and Hold the Power Button for 1 minute

d. Refix the battery & Power

e. Now Switch on ur laptop it will work

[ If the Above Method is not Worked pl. follow my method 2 ]

Method : 2

a. Go to Google Search

b. Download the youtube how to disassemble ur laptop model

[ Ex:- How to disassemble Hp Pavillion Dv6000 youtube ]

c. Watch the Youtube carefully & Disassembly ur laptop

d. Remove the Processor , Ram , Cmos Battery & Clean the Fan

e. Wait for atleast 12 hrs [ i Fixed after 24 hrs]

f. Now Refix all & reassemble ur Laptop

g. Switch on ur Laptop [ 100% it will work ]

Gud Luck..! After u succeeded Comment me

Something funny - my own very very dim screen problem problem turned out to be Toshiba's eco setting which set brightness to 1. I had accidentally pressed a button that switches it on. The display is so dim it looks off, unless you shine a flashlight on it. Connecting to external display and undoing the eco setting solved it.

This was post Windows 10 though, I'm posting it here in case it helps someone.

If battery removal doesn't work, change your RAM. Low ram makes computer slow and eventually creates black screen.

I was going off this refrence. It was perfect. Only i had to hit F12 and put it in safe command. And this is one thing that I did difrent. Keept going to black screen.

The problem is much more simple in my case after long time boot with black screen in windows 10 toshiba satellite: problem is with graphic card driver, usually after install windows graphic card driver is allready there, in my case amd radeon hd, but windows ask you on install to dual monitors graphic card, all of us maybe check yes. In Device Manager I disabled in Display Adapters this Dual Monitors adapter, remaining only simple amd driver and display boot on restart very fast. Check your graphic device!

The monitor and keyboard on my 4 year old Toshiba Qosmio X75 Laptop would not turn on.

Here are a few things that I tried...

1. Press the F4 button (or FN+F4 keys simultaneously) to switch to external monitor and then again to switch back to the laptop monitor.

2. Press the Window key and the P key simultaneously, as per the manual's troubleshooting suggestion.

3. Unplug the power cord, remove the battery, plug in the power cord, press and hold the SHIFT/F8/Power buttons simultaneously (a quick press during the first attempt and then I held them for over a minute on the second attempt).

4. Press and hold the power button for more than a minute.

5. Remove the cover on the bottom of the laptop, remove the RAM memory cards, and put them back in to make sure they are seated properly.

This one fixed the problem...

6. Replace the CMOS battery (a CR2032 coin cell lithium battery). After four years of use, the old one was completely dead.

Hope this helps!