I set for pop corn the microwave got very hot
The screen code IP OT came up on my microwave oven??
Is this a good question?
Score
0
332699
2 Answers
Chosen Solution
Rep: 685.2k
3.4k
1.1k
2.6k
I could not find anything on the IP OT error code. My best guess would be the OT part of that stands for over time. Try unplugging the machine for five minutes, overnight might be better, to allow it to reset. This may be a control board failure. Personally I will not work on one of these things if it involves getting into it. They are just to dangerous. They are cheap and just not worth the risk. Keep a very close eye on it and discard if you get another failure.
Was this answer helpful?
Score
2
Rep: 77
3
Try not using the popcorn button
Set it for 3minutes watch over it and when popcorn stops for 2seconds between pops it is done
This may be due to wrong settings for the button or wrong time setting for it making it either too hot or making it go for too long
Was this answer helpful?
Score
0
