Fix Your Stuff Community Store

Repair information and guides for the iPhone 6S released by Apple on September 25, 2015. Models: A1688, A1633

2688 Questions View all

Options

iPhone 6s not turning on after getting hot

Hello,

I have an iPhone 6s and time ago I changed the battery in it, after some time the phone got extremely hot and now it won't pass the apple logo. I already changed the battery but the phone still won't boot (Now the new battery is drain and it won't charge nothing shows in the screen) I try restoring through iTunes but the phone is not recognize. I also check the voltage getting to the battery and it's 0.5V. Can a faulty charging port prevent the phone from booting even if the battery is fully charged?

Thanks

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest

Options

Sounds like you received a faulty battery. You should not buy a battery from that distributor again and get a new battery form some other distributor.

Was this answer helpful?

Yes No
Score 0

3 Comments:

I changed the battery twice already. I actually thought it would work is there a chance any component is causing this?

by

Did this unit get wet? Does the battery connect to the main board or a separate board? It is a bad circuit on the connected board and it might be too expensive to repair/replace.

by

No the unit never got wet all sensors are fine (no corrosion). That's why I find it strange to have this issue. I will try another battery so I can confirm is a bad circuit (I hope that solves the issue)

by

Add a comment

Add your answer

Daniel will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 103