Skip to main content

A Turbosteam iron by Morphy Richards.

15 Questions View all

No steam coming out

No steam coming from Morphy Richards iron

Answer this question I have this problem too

Is this a good question?

Score 4
2 Comments

I have descaled it about 5 times but steam light staying and no steam coming out

by

Hi descaled morphy Richards steamelite iron about 5 times but steam light stays flashing and no steam coming out

by

Add a comment

3 Answers

Most Helpful Answer

Have you put water in it? Have you pushed the button for steam. When you have done this, put the so it is vertical and sitting on it's little base. Now allow it to warm up for a min it or so. Then try it. I hope it works for you.

Was this answer helpful?

Score 2

3 Comments:

Yes I've put water in and left it now to cool of to try again

by

No tried all that no joy

by

If you’re steam irons stopped steaming try this simple trick on the water filler cap there is a small hole if it gets blocked the steam stops unblock it and wall-a steam again

Block Image

by

Add a comment

If you’re steam irons stopped steaming try this simple trick on the water filler cap there is a small hole if it gets blocked the steam stops unblock it and wall-a steam again

Block Image

Was this answer helpful?

Score 1
Add a comment

How do I descale my model 333020

Was this answer helpful?

Score 1
Add a comment

Add your answer

peterwalsh01 will be eternally grateful.
View Statistics:

Past 24 Hours: 4

Past 7 Days: 18

Past 30 Days: 86

All Time: 5,132