Skip to main content

Repair information and guides for the fifth generation of iPhone. Model: A1387

2189 Questions View all

Where is this rectangular rubber with groove be placed in iPhone 4S?

hi,

I opened up my Iphone 4S to replace the Home flexible circuit.

I found that one black colour rectangular rubber with groove dropped out but I do not know where it should be placed in the Iphone 4S?

It is about 8mm x 2mm.

I uploaded the photo of the rectangular rubber to this website: https://s4.postimg.org/8dqohvlwd/Rectang...

Can anyone advise where should it be placed inside the Iphone 4S?

Thank you.

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

3 Answers

Chosen Solution

hi, it goes on top of the motherboard

Block Image

Was this answer helpful?

Score 0
Add a comment

Sits on the top edge of the logic board and pushing against the housing when you slide the board in. Top left hand side I believe

Was this answer helpful?

Score 0
Add a comment

I found the location in the "iPhone 4S Power and Sensor Cable Replacement" Step 22, the photo with the red box near the QR code.

Was this answer helpful?

Score 0
Add a comment

Add your answer

John will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 108