Fix Your Stuff Community Store

Nikon's D3200 DSLR has 24.2 megapixels. This model is geared towards casual photography enthusiasts with advanced specifications and performance.

66 Questions View all

Options

Display not working while in manual mode.

i've been testing my camera (a Nikon D3200) by filming with various shutter speeds (from 1/30 to 1/1000). And after that, I noticed that in manual mode, the shutter speed, iso, and aperture got stuck. Shutter speed at 1/400, iso at 200. It just doesn't change when I use my buttons. In auto mode or in any other mode except manual, it does change automatically. I've reset shooting and setup settings to default but that didn't help. Also I removed the battery and lens for a few hours and tried again but that also didn't work.

I hope this video will make easier for you to understand my situation. https://www.dropbox.com/s/8o5jf4z7ngvmob...

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest

Options

have you tried updating the firmware to the latest available, it could be a software glitch. Have you tried using aperture and shutter priority modes to see if the same thing is happening there. if it is it could be that the command dial is faulty and registering inputs that are not there, changing the settings as if you were using the dial.

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

Nikola Tesla will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 5

All Time: 944