What component used to be here (red circle in pic) and, where can I find another to replace it?
It appears to be a small coil of wire that was originally soldered into the bracket in the previous picture.
Really trying to avoid replacing the entire $300 Logic Board, if possible.
Thanks!
Is this a good question?
Rep: 782.1k
1.1k
893
2.3k
@jengatron looks like your board is a 820-2936 EMC 2419. The component missing is reference designator L6995, which is a 33UH 20% 0.44A 0.455OHM wire wound inductor. It is a Toko D52LC series. You may find a replacement on Digikey.com or Mouser .com as well as many other places. This answer is just to identify the part, not to diagnose your board or what damaged the inductor.
Was this answer helpful?
My hero, that's all I needed, thanks!
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 137
2 Comments
@jengatron what's the 820-XXXX on your board?
by oldturkey03
It is 820-2936-A
by jenga