I'm getting an F28 error.
Is the Kenmore Elite HE3 the same as the Kenmore Elite HE3t? I'm attempting to reset the CCU and MCU wires, but I'm not sure I'm seeing where I should be working.
Is this a good question?
Score
0
326317
2 Answers
Most Helpful Answer
Rep: 782k
1.1k
893
2.3k
lyle3 check the answer i'm getting a f28 error code and see if that will work for you.
Was this answer helpful?
Score
1
Hey oldturkey03 - thanks for your reply! I actually did start with that post's information, and when I removed the top of our washer, the pieces he described were not in the same location. That's why I thought there might be some different info out there for the HE3t. I checked all connections and replaced the top, but our washer is still doing the same thing: the water will begin to fill the drum, but after three seconds snaps off and the door makes the locking sound again. After that, nothing. The problem is bound to be related to our shifting the washer about three feet the other day, and I'm guessing the door thinks it's unlocked or isn't getting all the right info, etc.
Was this answer helpful?
Score
0
