Released September 25, 2015. Model A1688/A1633. Repair of this device is similar to previous generations, requiring screwdrivers and prying tools. Available as GSM or CDMA / 16, 64, or 128 GB / Silver, Gold, Space Gray, or Rose Gold options.

627 Questions View all

6s screen lcd does not work after replacement, works for 1 sec

I changed the screen on a iPhone 6s, when I was to power on the device there was no apple boot logo. I know the phone is on because of the sound it makes when I connect to the charger, and it is recognised by my computer, sometimes the lcd flashes on for one second then goes dark. the touch works as well since I can unlock the phone and hear the buttons being pressed on for the passcode. This problem now happens with the old screen as well and also with other new screens.

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

Chosen Solution

Sounds to me like you've broken the LCD socket on the logic board. This requires microsoldering, if you have the tools

https://www.google.com/aclk?sa=L&ai=DChc...

Stjin's right. Maybe you can just clean it with 90% isopropyl alcohol

Was this answer helpful?

Score 1
Add a comment
Most Helpful Answer

Hey hejokr13,

I think the connector on the logic board of the phone is damaged or it's a bit dirty. You probably have to replace the logic board.

Was this answer helpful?

Score 1
Add a comment

Add your answer

hejokr13 will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 72