The Kenmore 110 Series is an easy to use home Washing machine created by Kenmore.

237 Questions View all

Why wont the cold water shut off?

The cold water keeps running after the washer starts and I don't believe that it would ever shut off. We have to stand there and turn the cold water faucet off and on during the whole washing cycle.

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Most Frequent Causes for Washer overflowing

Cause 1

Water Inlet Valve

Try shutting off power to the washer. If the washer still overflows even when it is not getting power, this indicates that the water inlet valve is defective. If the water inlet valve is defective, replace it.

Cause 2

Pressure Switch

The pressure switch shuts off power to the water inlet valve when the proper water level is reached. If the pressure switch fails, the water inlet valve will continue to fill the washer tub with water, causing the washer to overflow. Before replacing the pressure switch, check the air tube to the pressure switch to ensure that it is clear of debris and is not leaking.

Cause 3

Low Water Pressure from House Supply

The water pressure to the water inlet valve might be too low. The water inlet valve requires a minimum of 20 psi to shut off properly. If the water inlet valve does not get enough pressure, the valve may not close fully after the power is shut off. As a result, water can leak into the washer and cause it to overflow. Check the water pressure to determine if it is sufficient.

Please give us your model number for parts identification and where to get.

Was this answer helpful?

Score 4
Add a comment

Add your answer

Shirley Ducklow will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 61