MacBook Pro won't start after replacing MagSafe port
After following the instructions to replace the Magsafe port the computer started right up and connector indicator light was lit. I went through a shutdown on the computer and now it won't restart and the magsafe connector is not lit. I started this project with a dead battery and have rechecked all my connections. Any suggestions?
Is this a good question?
Score
0
What was the reason in replacing the dc-in magsafe?
by John
Sounds like an eBay part.
by mayer
Laptop would not charge so replaced dc-in port. Purchased replacement part from ifixit. It initially worked, but after the computer was shutdown it no longer charged.
by Phil Seaton
What is your specific model and please give a link to the part you bought.
by mayer
Model A1278 and link to product MacBook Pro Unibody 13" and 15" MagSafe DC-In Board
by fourseatons